 | Power on-off/Fail Safe Switch The smooth operating toggle
switch placed in the on position provides power from selected power source
(external or battery).Toggle to aft position removes power from intercom
and provides fail safe operation by routing transmit and receive audio
directly to headset. |
| Battery Select Switch is used when indicator light pulsates red
to signal low battery - After switching to new battery indicator light
will return to pulsating green. Low battery should be replaced as soon as
possible. |
| Power/Battery Indicator Light illuminates constant green when
using external power operation. pulsating green for internal battery
operation and pulsating red for low internal battery. |
| Pilot and Co-pilot Jacks will accept the standard plugs (PJ-055
headset and PJ-068 microphone) from any general aviation headset and the
microphone plug from a portable P44 Switch like DCC Model C1O-15. |
| A Front Panel Push-To-Talk Button is provided for pilot
transmissions when a yoke mounted PU or a portable PU Switch is not used.
|
| Volume Control Knob for setting system volume level.
Individual's headset level can be set with headset volume controls. |
| Squelch Control Knob for setting VOX threshold for voice
activation of intercom for pilot and copilot positions. VOX threshold for
passengers is set from Model 2OOEX Expansion Module. |
| Auxiliary Input Jack will accept signals from devices such as
portable CD and tape players. Aux in will mute with radio reception. |
| Auxiliary Output Jack will provide line level signal for
driving CVRs, tape recorders or other such devices. |
| External Power Input Jack will accept plug from power cord
supplied for use with external power. |
| Expansion Jack will accept the plug of the extension cord
supplied with Model 2OOEX Expansion Module to expand the system to a four
place and six place system. |
| Battery Powered by one of two available batteries. When one
battery begins to drain (after approx. 40 hrs.) simply switch to second
battery using battery select switch for an additional 40 hrs. of intercom
use. |
| Battery Cover Plate is easily removed for replacing batteries
by simply unscrewing the thumb nut and replacing the batteries. |
